Stud Calculator

Calculate Wall Framing

Studs: 16

Plate Linear Feet (3 plates): 60.00

Plate Boards (8 ft): 8

Share This Calculation

Embed This Calculator

Add this calculator to your website:

Ad Slot — Replace with AdSense Code

Formula

studs = ceil(L × 12 ÷ sp) + 1 + corners × 3 + openings × 2
plates_ft = L × 3

Assumes triple plate (double top + single bottom) and 8 ft plate boards.

Example Calculation

Wall 20 ft at 16 in OC, 1 corner, 0 openings

Studs = ceil(20 × 12 ÷ 16) + 1 = ceil(15) + 1 = 16 studs
Corners = 1 × 3 = +3
Total studs = 16 + 3 = 19
Plate ft = 20 × 3 = 60 ft
Plate boards = ceil(60 ÷ 8) = 8 boards

FAQ

How many studs for a 10 ft wall?
At 16 in on-center you need 9 studs for a 10 ft wall (120/16=7.5 plus 1 end stud plus 1 extra). At 24 in oc you need 6 studs. Add 3 extra per corner intersection and 2 per door or window for jack and king studs.
Should I use 16 or 24 inch spacing?
Use 16 in oc for exterior and load-bearing walls - it aligns with drywall and sheathing and meets code in most places. 24 in oc saves lumber and is allowed for non-bearing interior walls with 5/8 in drywall. Check local code.
How many top plates do I need?
You need triple the wall length in linear feet: two top plates and one bottom plate. For a 20 ft wall that's 60 linear ft of plate. Add extra for overlaps at corners and intersections - cut 2x4s at 8,10,12 ft to minimize waste.

Recommended Products