Stair Calculator

Enter Your Stair Dimensions

Results

Number of Risers0
Riser Height0
Number of Treads0
Total Run0
Stringer Length0
Comfort Ratio (2R+T)0
Code Status—
Formula: risers ≈ totalRise / 7 (ideal); actualRise = totalRise / risers; treads = risers - 1; stringer = √(rise² + run²); comfort = 2R + T (ideal 24-25)
Example: Total rise 105 in: 15 risers at 7.0 in, 14 treads at 10.5 in, total run 147 in, stringer length 180.5 in. Comfort ratio = 24.5 (ideal).

Share This Calculation

Embed This Calculator

Ad Slot — Replace with AdSense Code

Reference Table

Rise (in)Run (in)2R+TComfort Level
7.011.025.0Ideal
7.2510.525.0Ideal
7.510.025.0Ideal
7.7510.025.5Acceptable
8.09.025.0Min Code

Frequently Asked Questions

Building code requires 7-8 inch rise and minimum 10 inch run (tread depth). The sweet spot is 7.5 inch rise with 10.5 inch run. Use the comfort formula: 2 × Rise + Run should equal 24-25 inches. Steeper than 8 inch rise feels like a ladder and is uncomfortable.

Use 3 stringers for stairs up to 36 inches wide, 4 stringers for 36-48 inches wide, and space them no more than 16 inches apart. Cut stringers from 2x12 lumber and notch carefully — one bad notch and you'll need to start over with a new board.

Yes — code requires riser height variation of no more than 3/8 inch between any two risers. Your first riser may differ from the rest. If your floor isn't perfectly level, adjust the bottom riser slightly but keep all other risers identical to maintain a safe, comfortable staircase.

Recommended Products