Shingle Calculator

Roof Measurements

Results

Roof Surface Area0.00
Squares Needed0
Bundles Needed (3/sq)0
Ridge Cap (linear ft)0

Share This Calculation

Embed This Calculator

Add this calculator to your website:

Ad Slot — Replace with AdSense Code

Formula

area = L × W × pitchFactor
squares = ceil(area / 100)
bundles = squares × 3
ridgeCap = L (linear feet)

Example Calculation

A 24 × 40 ft house with 6/12 pitch:
Area = 24 × 40 × 1.118 = 1,073.28 sq ft
Squares = ceil(1073.28 / 100) = 11 squares
Bundles = 11 × 3 = 33 bundles
Ridge cap = 24 linear ft

Pitch Factor Reference

PitchFactorAngle
3/121.03114°
4/121.05418°
6/121.11827°
8/121.20234°
12/121.41445°

FAQ

One roofing square is 100 sq ft of finished roof. Architectural shingles are 3 bundles per square, while some 3-tab shingles are 3-4 bundles per square depending on brand. Check the wrapper for coverage.
Multiply footprint area by pitch factor: 4/12 = 1.054, 6/12 = 1.118, 8/12 = 1.202, 12/12 = 1.414. Steeper pitch means more shingle area than footprint. Our calculator applies this automatically.
Add 10% waste for simple gable roofs and 15% for hips, valleys and dormers. Complex roofs with lots of cuts can need 20% extra. Rounding up to the next full square already adds some waste.

Recommended Products