Retaining Wall Calculator

Enter Your Wall

Results

Number of Courses0
Blocks per Course0
Total Blocks0
Base Gravel (tons)0
Formula: courses = ceil(H × 12 / blockH); blocksPerCourse = ceil(L × 12 / blockL); totalBlocks = courses × blocksPerCourse; gravel = (L × baseDepth/12 × 2) / 27 × 1.4
Example: 20 ft long, 3 ft high, 12×6 inch blocks: courses=6, per course=20, total=120 blocks. Base gravel: 0.52 tons.

Share This Calculation

Embed This Calculator

Ad Slot — Replace with AdSense Code

Frequently Asked Questions

Most jurisdictions allow 3-4 ft without a permit or engineering. Over 4 ft needs a structural engineer, geogrid reinforcement, and building permits. Always check local codes before building — fines for unpermitted walls can exceed the cost of the wall itself.

YES — always. Without drainage, water pressure builds up and pushes the wall over. Install 4-inch perforated pipe at base of wall, cover with 12 inches of clean gravel behind the wall, and use filter fabric to separate soil from gravel. This adds $2-5 per linear foot.

Bury the first course at least 6 inches below finished grade on 6 inches of compacted gravel. For walls over 3 ft, bury 1/8 of total wall height (a 4 ft wall needs 6+ inches buried). Add geogrid reinforcement every 2 courses above 3 ft for additional stability.

Recommended Products