Stair Code — IRC 2021 Requirements

IRC Stairway Provisions Overview

IRC Section R311.7 governs interior and exterior stairways in one- and two-family dwellings. The code ensures safe, consistent stair geometry. All dimensions below are minimums unless stated as maximums. The "7-11 rule" is a common design heuristic: riser height + tread depth should total between 17" and 18" (ideal: 17.5"), and twice the riser plus tread should be 24" to 25".

Stair Geometry Requirements

DimensionRequirementNotes
Riser Height (max)7-3/4"Difference between largest & smallest riser ≤ 3/8"
Tread Depth (min)10"Measured nosing to nosing
Headroom (min)6'8"Measured vertically from tread nosing line
Stairway Width (min)36"Above handrail height
Landing Depth (min)36"Same as stair width
Nosing Projection3/4" — 1-1/4"Not required if tread depth ≥ 11"
Max Risers per Flight12'3" verticalLanding required between flights

Handrail Requirements

ConditionRequirement
When required4 or more risers
Handrail height34" — 38" above tread nosing
Handrail grip sizeType I: 1-1/4" — 2" perimeter; Type II: larger or shaped
Continuous requirementFull length of stair flight
Wall clearance1-1/2" minimum from wall
End returnsTerminate at newel post or return to wall/floor

Winder & Spiral Stair Exceptions

Winder treads must have minimum 6" depth at narrow end and 10" at 12" walkline. Minimum 10" deep treads required for spiral stairs at the 12" walkline with 6-3/4" minimum at narrow end. Spiral stairs must be 26" minimum width. All winder steps within a flight must have identical tread geometry.