Wood screws are sized by gauge number (#) which indicates shank diameter, followed by length in inches. Higher gauge numbers mean thicker screws. For example, a #8 × 1-1/2" screw has a #8 shank diameter and is 1-1/2 inches long. Drywall and specialty screws follow different conventions.
| Gauge (#) | Shank Dia (in) | Head Dia (in) | Pilot Hole (softwood) | Pilot Hole (hardwood) | Common Lengths |
|---|---|---|---|---|---|
| #4 | 0.112 | 0.212 | 1/16" | 3/32" | 3/8" — 1-1/4" |
| #6 | 0.138 | 0.262 | 5/64" | 3/32" | 1/2" — 2" |
| #8 | 0.164 | 0.312 | 7/64" | 1/8" | 5/8" — 3" |
| #10 | 0.190 | 0.362 | 1/8" | 9/64" | 3/4" — 4" |
| #12 | 0.216 | 0.408 | 9/64" | 5/32" | 1" — 4" |
| #14 | 0.242 | 0.472 | 5/32" | 11/64" | 1-1/4" — 6" |
| Type | Common Sizes | Thread | Use |
|---|---|---|---|
| Drywall Screws | #6 × 1-1/4" (1/2" bd); #6 × 1-5/8" (5/8" bd) | Coarse (wood), Fine (metal) | Hanging drywall |
| Deck Screws | #8 × 2-1/2" to 3" | Coarse, Type 17 point | Deck boards to joists |
| Structural Screws | 1/4" × 3" to 6" | Heavy, hex/flange head | Ledger boards, beams |
| Pocket Screws | #7 or #8 × 1-1/4" to 2-1/2" | Fine, washer head | Cabinet joinery |
| Lag Screws | 1/4" — 5/8" dia, 1"—12" length | Coarse hex head | Heavy structural connections |
Flat head: Countersunk, sits flush — standard for woodworking. Pan head: Rounded top, used with washers for metal-to-metal connections. Trim head: Small countersunk head for finish applications. Drive styles: Phillips (#2 most common), Torx/Star (T15, T20, T25), Square/Robertson (#1, #2), and Hex. Torx and square drives reduce cam-out compared to Phillips.