Like dimensional lumber, plywood thickness is sold by a nominal measurement that differs from the actual sanded thickness. Most plywood undergoes sanding during manufacturing, which removes approximately 1/32" per face. APA-rated panels follow thickness standards defined in PS 1 and PS 2.
| Nominal | Actual (sanded) | Typical Plies | Common Applications |
|---|---|---|---|
| 1/4" | 7/32" (5.6 mm) | 3 | Underlayment, paneling, crafts |
| 11/32" | 11/32" (8.7 mm) | 3—4 | Roof sheathing |
| 3/8" | 11/32" (8.7 mm) | 3—4 | Wall sheathing, soffits |
| 7/16" | 7/16" (11.1 mm) | 3—4 | OSB wall sheathing |
| 15/32" | 15/32" (11.9 mm) | 4—5 | Roof sheathing (24" oc) |
| 1/2" | 15/32" (11.9 mm) | 4—5 | Subfloor, wall sheathing |
| 19/32" | 19/32" (15.1 mm) | 4—5 | Sturd-I-Floor subfloor |
| 5/8" | 19/32" (15.1 mm) | 5 | Subfloor, roof sheathing |
| 23/32" | 23/32" (18.3 mm) | 5—7 | Sturd-I-Floor subfloor |
| 3/4" | 23/32" (18.3 mm) | 5—7 | Heavy subfloor, cabinets |
| 1" | 31/32" (24.6 mm) | 7+ | Industrial, countertops |
| 1-1/8" | 1-3/32" (27.8 mm) | 7—9 | Heavy industrial flooring |
Oriented Strand Board (OSB) is manufactured to the same nominal thicknesses as plywood but uses compressed wood strands instead of veneers. OSB is generally 5—10% cheaper than plywood, has more consistent density, but is heavier and more susceptible to moisture swelling at edges. Both products carry APA span ratings that dictate proper joist spacing.