Softwood lumber is graded according to the American Softwood Lumber Standard (PS 20) by certified grading agencies. Grades are based on visual inspection or machine stress rating (MSR). Visual grades consider knot size and frequency, slope of grain, shake, wane, and other natural characteristics. MSR uses non-destructive mechanical testing.
| Grade | Common Name | Typical Fb (psi) | Characteristics |
|---|---|---|---|
| Select Structural | #SS | 1,500 — 2,850 | Highest strength, tight knots, minimal defects |
| No.1 | #1 | 1,200 — 2,100 | Good quality, moderate knot sizes |
| No.2 | #2 | 875 — 1,750 | Standard framing grade, most common |
| No.3 | #3 | 500 — 900 | Lower strength, larger knots permitted |
| Stud | Stud grade | 675 — 1,350 | Optimized for vertical wall studs (8'—10') |
| Construction | Const | 1,000 — 1,800 | Between #2 and Standard in quality |
| Standard | Std | 575 — 1,150 | Average grade, general utility |
| Utility | Util | 275 — 550 | Lowest structural grade, blocking only |
| Grade | Common Size | Characteristics | Use |
|---|---|---|---|
| B & Better | 1×4 — 1×12 | Nearly clear, minimal pin knots | Fine cabinetry, trim |
| C Select | 1×4 — 1×12 | Clear one face, minor defects on reverse | Paneling, visible shelving |
| D Select | 1×4 — 1×12 | Pin knots, minor defects on both faces | Painted trim, shelving |
| No.1 Common | 1×4 — 1×12 | Sound, tight knots; limited voids | Knotty pine paneling |
| No.2 Common | 1×4 — 1×12 | Larger knots, some voids permitted | Shelving, paneling, sub-siding |
| No.3 Common | 1×4 — 1×12 | Knots, splits, wane permitted | Barn siding, crates |