Drywall (gypsum board) comes in standard sheet sizes and thicknesses optimized for different applications. The most common sheet size is 4' × 8', but longer lengths up to 16' are available for commercial use. Thickness ranges from 1/4" to 5/8".
| Thickness | Weight (4×8 sheet) | Application | Stud Spacing |
|---|---|---|---|
| 1/4" (6.4 mm) | ~38 lbs | Curved walls, laminating over old drywall | 16" oc max |
| 3/8" (9.5 mm) | ~45 lbs | Repair patches, double-layer walls | 16" oc max |
| 1/2" (12.7 mm) | ~54 lbs | Standard walls, residential ceilings | 16" oc (walls), 16" oc (ceilings) |
| 5/8" (15.9 mm) | ~72 lbs | Fire-rated assemblies, ceilings | 24" oc (ceilings) |
| Size (ft) | Coverage | Typical Use |
|---|---|---|
| 4 × 8 | 32 sq ft | Standard residential (8' ceilings) |
| 4 × 9 | 36 sq ft | 9' ceiling rooms, fewer butt joints |
| 4 × 10 | 40 sq ft | 10' ceilings |
| 4 × 12 | 48 sq ft | Commercial, long walls |
| 4 × 16 | 64 sq ft | Special order, commercial |
| 54" × 12' | 54 sq ft | Basement ceilings (reduced seams) |
Tapered edge: Thin recess along long edges to accommodate joint tape and compound — standard for finishing. Square edge: Flat edges, used for texture finishes or laminating. Beveled edge: Found on some specialty panels. Tongue & groove: Interlocking edges for subfloor/underlayment panels.