Concrete compressive strength is measured in pounds per square inch (PSI) at 28 days of curing. The mix design — ratio of cement, aggregate, water, and admixtures — determines the final strength. Higher PSI concrete has lower water-to-cement ratios and typically more cementitious material per cubic yard. Air-entrainment (4—7%) is standard for exterior concrete in freeze-thaw climates.
| PSI Rating | Typical Mix Ratio (C:S:A) | Water/Cement Ratio | Sack Count | Application |
|---|---|---|---|---|
| 2,500 PSI | 1:3:4 | 0.65 | 5 sack | Interior non-structural, curbs, sidewalks (residential) |
| 3,000 PSI | 1:2.5:3.5 | 0.58 | 5.5 sack | Sidewalks, patios, steps, residential slabs |
| 3,500 PSI | 1:2:3 | 0.52 | 6 sack | Driveways, garage floors, foundation walls |
| 4,000 PSI | 1:1.75:2.75 | 0.45 | 6.5 sack | Garage/shop floors, reinforced beams, basement slabs |
| 4,500 PSI | 1:1.75:2.5 | 0.40 | 7 sack | Commercial floors, bridge decks |
| 5,000 PSI | 1:1.5:2.25 | 0.38 | 7.5 sack | Structural columns, high-performance slabs, precast |
| Application | Minimum PSI | IRC Section |
|---|---|---|
| Footings (basement/retaining wall) | 2,500 PSI | R403.1 |
| Foundation walls | 2,500 PSI | R404.1 |
| Basement slabs | 2,500 PSI | R506 |
| Garage slabs | 3,500 PSI | R309 |
| Exterior flatwork (air-entrained) | 3,000 PSI | Best practice |
| Post/footing pads | 2,500 PSI | R403 |