Concrete Block Sizes — CMU Dimensions

About Concrete Masonry Units

Concrete Masonry Units (CMU) are manufactured in standard nominal sizes that include a 3/8" mortar joint. The actual block dimensions are 3/8" less than nominal in each direction. CMUs come in various densities and strengths, with lightweight blocks weighing approximately 28—35 lbs and normal weight blocks 38—55 lbs.

Standard CMU Sizes

Block TypeNominal (L×H×W)Actual (L×H×W)Blocks per 100 sq ftWeight (normal wt)
4" Stretcher16×8×415-5/8×7-5/8×3-5/8112.5~28 lbs
6" Stretcher16×8×615-5/8×7-5/8×5-5/8112.5~34 lbs
8" Stretcher16×8×815-5/8×7-5/8×7-5/8112.5~38 lbs
10" Stretcher16×8×1015-5/8×7-5/8×9-5/8112.5~45 lbs
12" Stretcher16×8×1215-5/8×7-5/8×11-5/8112.5~52 lbs
8×8×16 Corner16×8×815-5/8×7-5/8×7-5/8112.5~38 lbs
8" Half Block8×8×87-5/8×7-5/8×7-5/8225~21 lbs
8" Sash (pillar)16×8×815-5/8×7-5/8×7-5/8112.5~42 lbs

Bond Beam & Lintel Blocks

Bond beam blocks have a U-shaped channel in the top to accommodate horizontal reinforcing steel and grout. They come in the same nominal sizes as standard stretchers. Lintel blocks also have a U-channel and can be pre-cast or formed on-site. Both require grout fill at every cell containing rebar.

Mortar & Grout

CMU walls use Type N or Type S mortar with a 3/8" joint. Grout is used to fill cells with rebar and must be placed in lifts not exceeding 5 feet. For 8" block, each cell requires approximately 0.5 cubic feet of grout. A typical 8×8×16 block has about 45—55% solid material by volume — the remainder is core void.