Gravel Calculator

Calculate gravel and crushed stone for driveways, paths and landscaping. Get cubic yards, tons and total cost based on material density and depth.

Dimensions

Results

Cubic Feet160.00
Cubic Yards5.93
Tons Needed8.30
Estimated Cost$290.37

Share This Calculation

Embed This Calculator

Add this calculator to your website:

Ad Slot — Replace with AdSense Code

Formula

Step 1: Cubic Feet = L × W × (D/12)
Step 2: Cubic Yards = Cubic Feet / 27
Step 3: Tons = Cubic Yards × Density
Step 4: Total Cost = Tons × Cost per Ton

Example Calculation

12×40 ft driveway at 4 in deep, crushed stone:

cf = 160, cy = 5.93, tons = 8.3. Order 9 tons to allow compaction.

Reference Table

MaterialTons / CYUse
Crushed Stone1.40Base, driveway
Pea Gravel1.30Drainage, decor
Bank Run1.50Fill

Frequently Asked Questions

Most crushed stone weighs 1.4 tons per cubic yard, pea gravel about 1.3 tons, and crusher run up to 1.5 tons. We use 1.4 as the default because it's the most common for driveways. Multiply cubic yards by density to get tons.

A new driveway needs 6-8 inches total: 4-6 inches of large 2-3 in crusher run base compacted, then 2-3 inches of 3/4 in crushed stone on top. For a top-up on existing base, 3-4 inches is enough. Always compact in 2-3 in lifts.

Use 3/4 in crushed angular stone with fines (often called 3/4 in crusher run or road base) for the base - it locks together and doesn't shift. Top with 1/2-3/4 in clean crushed for drainage and grip. Avoid round pea gravel for driveways as it moves under tires.

Recommended Products