Fence Calculator

Plan your wood fence project with this calculator. Get post count, rail count and picket count based on total length, spacing and picket dimensions.

Fence Dimensions

Results

Posts Needed14
Rails Needed (3 per section)42
Pickets Needed219

Share This Calculation

Embed This Calculator

Add this calculator to your website:

Ad Slot — Replace with AdSense Code

Formula

Step 1: Posts = ceil(L / Spacing) + 1 + Gates
Step 2: Rails = Posts × 3
Step 3: Pickets = ceil((L × 12) / (Picket Width + Gap))

Example Calculation

100 ft run, 8 ft spacing, 5.5 in picket no gap:

posts = 14, pickets = 218. Add a gate post if needed.

Frequently Asked Questions

With standard 5.5 in dog-eared pickets and no gap, you need about 2.18 pickets per linear foot. For a 100 ft fence that's 218 pickets. With a 0.5 in shadowbox gap, you need about 2 pickets per foot.

Set posts one-third of total length in ground plus 6 inches of gravel for drainage. For a 6 ft fence use 8 ft posts set 30-36 inches deep, or deeper than frost line in cold climates (36-42 in). Use concrete collar top 8 inches below grade.

Most residential privacy fences use 8 ft on-center spacing for economy and strength. Use 6 ft spacing for high wind areas or heavy gates. Always double posts at corners and gates for extra support.

Recommended Products